01:11:23 GMT+0000 (Coordinated Universal Time)
MLFI50-250-C-LN-ZR-W2-N-FA517.2
Module de guidage linéaire
Actionneurs avec système de guidage à galets de came interne et entraînement à courroie crantée.Conception à faible bruit avec rail de support en trois segments, deuxième chariot entraîné et fentes de fixation dans le chariot
Information produit
Cotes métriques
Cotes impériales
dimensions principale & données de performance
B2 | 88 mm | Total Width |
H | 110 mm | Hauteur |
L | 250 mm | Longueur |
≈m | 10 kg/m | Poids |
Cotes de montage
D86 | 68 mm | |
Tol D86 | G7 | Tolerance |
D87 | 110 mm | ø Bolt circle |
d85 | 20 mm | |
Tol d85 | h7 | Tolerance |
d86 | 61 mm | ø Inner Fit |
L88 | 31 mm | |
G87 | M6 | Thread |
h85 | 53.4 mm | |
JB43 | 40 mm | |
JB8 | 40 mm | |
l41 | 58.8 mm | 1 |
l42 | 81.5 mm | 1 |
NB85 | 6 mm | Width of Keyway |
Tol NB85 | P9 | Tolerance |
NL85 | 25 mm | Length of Keyway |
NT85 | 3.5 mm | Depth of Keyway, Tolerance P9 |
T86 | 2.3 mm | Depth Fit |
Tol T86 up | 0.3 mm | Upper Tolerance |
Tol T86 low | 0 mm | Lower Tolerance |
t87 max | 24 mm |
Dimensions
B1 | 86 mm | Width of Carriage |
B4 max | 89.2 mm | |
B18 | 15 mm | |
H1 | 19 mm | Height of Carriage |
H2 | 90 mm | Hauteur |
H4 | 101.4 mm | Height of Return Unit |
H18 | 60 mm | |
h13 | 20 mm | |
h14 | 60 mm | |
h18 | 10 mm | |
L1 | 260 mm | longueur |
L2 max | 24,000 mm | Maximum length of Support Rail |
L4 | 97 mm | |
L6 | 6 mm | Length of Wiper Brushes |
L18 | 400 mm | |
LTn min | 500 mm | Support Rail in Segments length min |
LTn max | 8,000 mm | Support Rail in Segments length max |
S41 | 28 mm | 1 |
S | 85 mm | cote |
Données techniques
mLAW | 2.27 kg | Mass of Carriage |
m1 | 2.78 kg | Mass of Connecting Plates of Profiles |
m3 | 2.27 kg | Mass of additional Carriage |
vmax | 8 m/s | Maximum Speed |
amax | 40 m/s2 | Maximum Acceleration |
Rx | 82.3 mm | |
Ry | 32 mm | |
Rz | 8.5 mm | |
I C | 11,400 N | Load direction I: compressive load |
I C0 | 5,200 N | Load direction I: compressive load |
II C | 11,400 N | Load direction II: tensile load |
II C0 | 3,520 N | Load direction II: tensile load |
III C | 16,800 N | Load direction III: lateral load |
III C0 | 10,000 N | Load direction III: lateral load |
M0x per | 164 Nm | Max. permissible static moment per Carriage 2 |
M0y per | 400 Nm | Max. permissible static moment per Carriage 2 |
M0z per | 200 Nm | Max. permissible static moment per Carriage 2 |
Iy | 300 cm4 | Geometrical moments of inertia of Support Rail |
Iz | 198 cm4 | Geometrical moments of inertia of Support Rail |
information additionnelle
68.8 Nm | Max. permissible drive torque | |
4 x LFR5201-10-2Z | Track Rollers | |
0.1 mm | Repeat Accurancy ± | |
200 mm | Feed (mm/rotation) | |
50BATK10 | Toothed Belt | |
0.3 kg/m | Mass of Toothed Belt | |
1,880 N | Permissible Toothed Belt operating force | |
5 kg*cm2 | Mass moment of inertia of Gears and Gearboxes |
Plage de température
Tmin | 0 °C | Minimum operating Temperatur |
Tmax | 80 °C | Maximum operating Temperatur |
Notes de bas de page
1
2
Téléchargements :
Votre alternative produit actuelle
Size code | 50 | |
Length of carriage | 250 | 250 mm |
Version | C | |
Design | LN | Low-Noise |
Drive type | (3)ZR | Toothed belt drive |
Additional carriage | W2 | Second, driven carriage |
Attachment to the carriage | N | T-Slots |
Support rail design | FA517.2 | Three-Piece |